Ionic fan installation and operation guide
There are many types of ion fans. Different types of ion fans have different installation methods. Today I will tell you how to install different types of ion fans.
1. Installation of horizontal ion fan
Place the ion fan directly on the workbench, or hang it above the workbench. After the power is turned on, start the ion fan, adjust the airflow to the work area where static electricity needs to be removed, and tighten the spiral buttons on both sides of the ion fan to start work.
2. Installation of suspended three-head ion fan
Hang the ion fan at a suitable height, and then adjust the direction of the air flow and the amount of air volume to the work area that needs to be destaticized to start the operation.
3. Installation of desktop ion fan
Place the ion fan on the workbench, connect the power supply to start the ion fan. Adjust the air flow generated by the ion fan to the working area where static electricity needs to be removed, and then tighten the knobs on both sides of the ion fan to work. Desktop ion blowers can also be used in suspension.
Specific operation:
The governor rotates clockwise until the indicator light is on, indicating that the ion fan has started, and at the same time, the ion fan's wind speed is increased after the ion flow is generated. Turn the governor counterclockwise to the "off" position, at this time the indicator light is off to indicate that the ion fan has stopped working.